1 ? low cost linear solution ? 50 or 500 pulses per inch ? stainless steel cable ? 0 to 50 inches of cable measurement ? various cable assemblies available model zlz - linear cable encoder (replaces model les) description the linear cable encoder can provide an accurate, yet low cost solution for linear measurement applications. common applications include robotics, extrusion presses, valve positioning, textile machinery, and gate control positioning, just to name a few. the zlz has some unique advantages over other sensing solutions. using a stainless steel cable, perfect parallel alignment is no longer required and with a 50 inch cable reach, it can easily be mounted away from harsh environments. the zlz is available in a quadrature output, allowing the sensor to operate in positioning applications. additional cable exit configurations, pulses per inch, and mating connectors are available on special request. contact the factory for details. open collector output wiring the zlz sensors have open collector outputs. an open collector output brings the uncommitted collector of the encoder switching device to the external world. because the collector element is not associated with the sensor supply voltage, the sensor output collector may be pulled up to external voltages (40 vdc max.) different than the encoder supply voltage . npn open collector outputs are current sinking devices. an output signal will not be generated unless a pull-up resistor is connected from the open-collector to the positive side of an external supply. the same supply can be used for powering the unit and for the pull-up resistor. specifications electrical specifications 1. input voltage : 4.75 to 28 vdc 2. input current : 80 ma maximum with no output load 3. input ripple : 100 mv peak-to-peak at 0 to 100 khz 4. output : npn open collector; 250 ma max per channel; incremental - square wave with channel a leading b during linear extension. 5. index : once per 5" cable extension or retraction 6. max frequency : 0 to 125 khz 7. symmetry : 180 (18) electrical 8. quad phasing : 90 (22.5) electrical 9. rise time : less than 1 sec mechanical specifications 1. full stroke length (fsl) : 50" standard. 2. finish : black powder coated aluminum 3. accuracy : 0.10% fsl 4. repeatability : 0.015% fsl 5. linear resolution : up to 500 cycles per inch (0.002" per cycle) 6. cable material : 0.034" nylon coated stainless steel rope 7. cable tension : 20 oz maximum typical 8. life (cycles) : 1,000,000 predicted at zero angle cable exit 9. connector type : 6-pin ms type connector 10. weight : 19 oz (538.64 g) environmental specifications 1. operating temperature : 0 c to 85 c 2. sealing : ip65 standard bulletin no. zlz-b drawing no. lp0734 released 08/13 tel +1 (717) 767-6511 fax +1 (717) 764-0839 www.redlion.net dimensions in inches (mm) ?0.69 (?17.53) 2.25 (57.15) 4.320.05 (109.731.27) 2.74 (69.6) 3.81 (96.8) ?0.20 (?5.08) thru 0.625 (15.875) 2.25 (57.15) 6-32 x 0.312 (7.92) dee p 0.13 (3.30) 4 pls on ?2.00 (?50.8) b.c. zlz 2.25 (57.15) 3.00 (76.2) 3.50 (88.9) 0.25 (6.35) 1.50 (38.1) ?0.21 (?5.33) thru 4x mounting bracket
ordering information description part number zlz quadrature output, 50 ppi, standard housing zlz0050g quadrature output, 500 ppi, standard housing zlz0500g model no. zlz wiring specifications slotted disc photo xistor's shaft led's +vdc data b common data a cable & connector assy (order separately) dual channel pulse shaping amp. le pin function ccarpg wire color +vdc a red common b black data a c white data b d green no connection e zlz electrical connections limited warranty the company warrants the products it manufactures against defects in materials and workmanship for a period limited to two years from the date of shipment, provided the products have been stored, handled, installed, and used under proper conditions. the companys liability under this limited warranty shall extend only to the repair or replacement of a defective product, at the companys option. the company disclaims all liability for any affirmation, promise or representation with respect to the products. the customer agrees to hold red lion controls harmless from, defend, and indemnify rlc against damages, claims, and expenses arising out of subsequent sales of rlc products or products containing components manufactured by rlc and based upon personal injuries, deaths, property damage, lost profits, and other matters which buyer, its employees, or sub-contractors are or may be to any extent liable, including without limitation penalties imposed by the consumer product safety act (p.l. 92-573) and liability imposed upon any person pursuant to the magnuson-moss warranty act (p.l. 93-637), as now in effect or as amended hereafter. no warranties expressed or implied are created with respect to the companys products except those expressly contained herein. the customer acknowledges the disclaimers and limitations contained herein and relies on no other warranties or affirmations. accessories ccarpg50 50' 6-pin 4-wire cable/connector ccarpg25 25' 6-pin 4-wire cable/connector ccarpg01 10' 6-pin 4-wire cable/connector ccarpg00 LEMTBR00 zlz mounting bracket mating 6-pin ms connector ccarpg part number description model no. red lion controls headquarters 20 willow springs circle york pa 17406 tel +1 (717) 767-6511 fax +1 (717) 764-0839 red lion controls china unit 302, xinan plaza building 13, no.99 tianzhou road shanghai, p.r. china 200223 tel +86 21 6113 3688 fax +86 21 6113 3683 red lion controls europe softwareweg 9 nl - 3821 bn amersfoort tel +31 (0) 334 723 225 fax +31 (0) 334 893 793 red lion controls india 201-b, 2nd floor, park centra opp 32 mile stone, sector-30 gurgaon-122002 haryana, india tel +91 984 487 0503
|
